Construction & fit-out fire self-check

For building, civil, and interior-fit-out sites: hot work, temporary power, temp structures/dorms, no e-bike charging in dorms, flammable storage, and fire lanes—use before shifts or walkthroughs. Follow your job hazard analysis, local codes, and regulator requirements.

• ✓Hot work: permit issued, fire watch present, extinguishers nearby, combustibles cleared, post-job spark check
• ✓Flammables: paints/solvents in dedicated storage; cylinders shaded/secured; no hazmat in dorms/offices
• ✓Temp buildings/dorms: panel fire rating, spacing, exits and egress meet local rules and the site plan
• ✓Temp fire water: hydrants/pumps/tanks or reliable tie-in phased with construction; pressure test records
• ✓Extinguishers: type/count/coverage at hot-work, electrical rooms, stores, wood shops match site hazard
• ✓Temp power: three-level supply/two-level protection; cables run overhead or in conduit; no illegal taps
• ✓Distribution boxes: weatherproof, grounded, one device per breaker/RCD; clear of combustible stacks
• ✓Scaffold & high hot work: no fuel loads on bays; compliant nets; catch pans/blankets for sparks/slag
• ✓Wood/metal shops: daily cleanup of shavings/dust; hot-work & smoking control; spacing from paint stores
• ✓Openings/edges/shafts: guards/covers secure; temp egress paths and emergency lighting unobstructed
• ✓Fire lanes & aerial appliance pads: clear of stacks/vehicles; turning radii and headroom for appliances
• ✓Dorms/canteen: no open flames or unsafe heaters; no e-bikes/batteries charged in dorms—use a site charging point; separate permits/watch for kitchen fire
• ✓Smoking: designated points, clear no-smoking zones, safe disposal of cigarette ends
• ✓Training & drills: induction covers fire safety; signed briefings for hot-work/power/work-at-height; alarm plan posted
• ✓Records: hot-work permits, patrols, equipment checks, and closed-loop hazard fixes with named owners

For internal training and self-checks only—not an inspection or enforcement outcome. High-risk work and formal system testing follow authority and qualified contractor requirements.